WILL NOT START
cpdtwo
Join Date: Apr 2006 Posts: 27 az |
2006-06-15 130900
HAVE 1500D USED IT YESTERDAY AND IT STOPPED WHILE UNDER LOAD. WHEN I WENT TO START IT TODAY NOTHING. TURNING OVER BUT NOT STARTING. CHECK FILTER,BLEED SYSTEM, CHECKED LINE, IT SEEMS TO HAVE NO PRESSURE IT FUEL SYSTEM. WITH LINES OFF AND CRACKING ONLY SMALL AMOUNT OF FUEL IS PUMPED OUT FROM PUMP. AND NO FUEL SEEMS TO STAY IN FUEL LINE AS IF IT IS LOSSING PRESSURE,SHOULD THE LINE KEEP PRESSURE IN IT? OR IS IT LEAKING BACK OUT WHEN SITTING. DO I NEED A NEW FUEL PUMP?
CPDTWO@MSN.COM
Reply to | Quote Reply | Add Photo
WILL NOT START
Peters
Join Date: Feb 2002 Posts: 3034 Northern AL Pics |
2006-06-15 130902
Did you check all the fuel filters including the one in the tank? ....
Reply to | Quote Reply | Add Photo
WILL NOT START
cpdtwo
Join Date: Apr 2006 Posts: 27 az |
2006-06-15 130906
just got it started , I now find that i'm getting a lot of blow out of thevent tube, dip stick tub ect. is it a blow ring or is it a bad valve and how do i find out which one? also does anyone know where I could get parts I would need. ....
Reply to | Quote Reply | Add Photo
WILL NOT START
Ym1110d
Join Date: Mar 2005 Posts: 22 Wisconsin |
2006-06-15 130908
Sounds like you need to do a leak down test. ....
Reply to | Quote Reply | Add Photo
WILL NOT START
cpdtwo
Join Date: Apr 2006 Posts: 27 az |
2006-06-15 130922
starded to take the engine if this was a gas auto it would be the rings. did check rings were alright but piston was srarded up real bad as if some metal got into the chamber, there is a metal build up near the top of the sleve thats not normal. the other pisto is like new. the one that was allcut up was hard to get out pass the build up. any idea about what may have caused this??and where is a good place for a piston and rings.all bearing seem in good shape. also a gasket kit for a 1500 ....
Reply to | Quote Reply | Add Photo
WILL NOT START
Peters
Join Date: Feb 2002 Posts: 3034 Northern AL Pics |
2006-06-16 130933
Their are a few places that stock parts for the Yanmar around the country. lsheaffer is a TP member that has parts in IL.
The list of possible reasons for piston scoring are endless. Is the wrist pin OK? Sounds like the piston was starved for oil. You need to check all the bearing. If one had turned and cut off the oil flow this will occur quickly. ....
Reply to | Quote Reply | Add Photo
WILL NOT START
cpdtwo
Join Date: Apr 2006 Posts: 27 az |
2006-06-16 130935
good oil bearing not burnt. ckecked oil flow with valve cover off and oilwas pumping fine. I have seen pistons blow before and even cut up but this one looked quite different. even at the top of the sleve where you rean it out I never saw a build up of metel on it.the piston almost didn't come out, had hard time on the bad one going past the build up. ....
Reply to | Quote Reply | Add Photo
WILL NOT START
oneace
Join Date: Mar 2004 Posts: 1490 south central pa Pics |
2006-06-16 130942
If you have it torn down that far I would replace the bearings. With out seeing first hand it is hard to tell. Can you e-mail pictures of the damage. ....
Reply to | Quote Reply | Add Photo
WILL NOT START
jerryc101
Join Date: Aug 2006 Posts: 24 Central Arkansas |
2006-08-26 133705
The only place to buy parts for any Yan Mar is WWW.HOYETRACTOR.COM located in S. OK, but they help with shipping and have every part you will ever need for a YM.
Have a YM2000. and swear by them. fast and reasonable. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This